Technical features:
| Test | Values | |
| Tensile strength | ISO 37 | > 14 MPa |
| Elongation at break | ISO 37 | > 350% |
| Thermal shock | ASTM D2671 (4 h at 215°C) | no dripping, cracking or flowing |
| Heat aging Tensile strength
Elongation at break |
ISO 188 (168 h at 160°C)
ISO 37 |
> 10 MPa 200% > |
| Flexibility at low temperature | ASTM D2671 (4h at -75°C) | no cracking |
| Flammability | ASTM D876 | passed |
| Dielectric strength | IEC 243-1 | > 8 kV/mm |
| Corrosion resistance (copper contact and
copper level) |
ASTM D2671 | no corrosion |
| Resistance to liquids
> Diesel, petrol, kerosene > Lubricating oils > Hydraulic oils > Tensile strength > Elongation at break |
ISO 1817
ISO 37
|
>10 MPa > 300% |
| Resistance to fungi | BS 2011 Pt 2.1J | not greater than rating 2 |
Authorisations
| Military |
| MIL-DTL 23053/16 VG95343 Pt 5
DEF STAN 59-97 Type 6B |
Dimensions:
| Master number | min. Diameter | max. Diameter
shrunk |
Wall thickness after
shrinkage |
Roll length [m] | |||
| [mm] | [inches] | [mm] | [inches] | [mm] | [inches] | ||
| SSED1/8″ | 3,2 | 0.125 | 1,6 | 0.062 | 0.76 | 0.027 | 50 |
| SSED3/16″ | 4,8 | 0.187 | 2,4 | 0.093 | 0,84 | 0.033 | 50 |
| SSED1/4″ | 6,4 | 0.250 | 3,2 | 0.125 | 0,89 | 0.035 | 50 |
| SSED3/8″ | 9,5 | 0.375 | 4,8 | 0.187 | 1,02 | 0.040 | 50 |
| SSED1/2″ | 12,7 | 0.500 | 6,4 | 0.250 | 1,22 | 0.048 | 30 |
| SSED3/4″ | 19,0 | 0.750 | 9,5 | 0.375 | 1,45 | 0.057 | 30 |
| SSED1″ | 25,4 | 1.000 | 12,7 | 0.500 | 1,78 | 0.070 | 30 |
| SSED1-1/2″ | 38,0 | 1.500 | 19,1 | 0.750 | 2,41 | 0.095 | 15 |
| SSED2″ | 50,8 | 2.000 | 25,4 | 1.000 | 2,79 | 0.110 | 22 |
Standard color:
black (bw)
