Flexible multilayer insulation made of NMN / NKN or composite chipboard

Flexible multilayer insulation made of NMN / NKN or composite chipboard

€0,00

 

We offer these flexible insulations not only in original rolls of 880-1000 mm width, but also as narrow rolls or as molded and punched parts according to your dimensional specifications.

 

 

Triflexil-M bonded particleboard (two-layer)
Details
Triflexil-M bonded particleboard (three-layer)
Details
Triflexil-MV/L (polyester fleece / polyester film / polyester fleece)
Details
Triflexil-M/VL-UE, coated (polyester fleece/polyester film/polyester fleece)
Details
Triflexil-NMN/50 µm (Nomex / Mylar / Nomex)
details
Triflexil-NMN/80 µm (Nomex / Mylar / Nomex)
details
Triflexil-NMN411 phase insulation (Nomex411 / polyester film / Nomex 411)
details
Triflexil-NKN (Nomex / Kapton / Nomex)
Details
Triflexil-NKN411 phase insulation (Nomex®411/Kapton®/Nomex®411)
details
Art.-Nr.

Triflexil-M bonded particleboard (two-layer)

 

Material:

Pressboard / Polyester

Temp. Class:

B (130°C) according to IEC 60085

Features:

  • Triflexil® 2.5M; double is a flexible multi-layer insulating material and temperature-resistant up to 130°.
  • The material properties and test methods are defined in IEC 60626
  • double combination consisting of a layer of electrical insulation film made of polyester in accordance with DIN IEC 60674 and a second layer of highly compressed roll pressboard
  • Type P6.1 according to IEC 60641-1
  • High dielectric strength is guaranteed by the use of an electrical insulation film made of polyester (F-PET)
  • Outer layers made of pressboard are highly absorbent for impregnating and trickling resins, resulting in excellent bonding of all winding components

 

Dimensions:

 

Master number according to IEC 60626-2 / standard climate 23/50
Nominal thickness Thickness tolerance Film thickness Mass per unit area Min. tensile strength unfolded Min. elongation unfolded Min. dielectric strength unfolded
lengthwise transverse lengthwise transverse
[mm] [%] [μm] [g/m2] [N/mm2] [%] [kV]
Slide PET 23 μm
VSZ25M/07 * 0,07 ± 15 23 80 90 60 2 8 6,5
VSZ25M/10 * 0,10 ± 15 23 115 100 65 3 10 7
VSZ25M/13 * 0,13 ± 15 23 165 85 60 3 10 7
VSZ25M/18 * 0,18 ± 15 23 215 90 60 3 10 7
VSZ25M/20 * 0,20 ± 15 23 250 90 60 5 13 8
VSZ25M/23 * 0,23 ± 15 23 290 90 60 5 13 8
VSZ25M/28 * 0,28 ± 15 23 350 90 60 5 13 8
VSZ25M/33 * 0,33 ± 15 23 430 85 60 5 13 9
VSZ25M/40 * 0,40 ± 15 23 500 90 60 5 13 9
Slide PET 36 μm
VSZ40M/17 * 0,17 ± 15 36 230 90 65 3 12 9
VSZ40M/25 * 0,25 ± 15 36 310 90 60 5 13 10
VSZ40M/27 * 0,27 ± 15 36 330 90 60 5 13 10
VSZ40M/30 * 0,30 ± 15 36 383 90 60 5 13 10
VSZ40M/40 * 0,40 ± 15 36 510 90 60 5 13 10
PET film 50 μm
VSZ50M/10 * 0,10 ± 15 50 120 100 70 3 10 10
VSZ50M/20 * 0,20 ± 15 50 260 95 70 3 10 10
VSZ50M/25 * 0,25 ± 15 50 320 95 60 3 10 10
VSZ50M/35 * 0,35 ± 10 50 440 95 60 5 13 11

 

* not a stock item This information only provides general guidelines for the use of our Products

 

Delivery formats: Roles: max. 1340 mm untrimmed, max. 1310 mm trimmed
Ribbons: from 4 mm width
Formats: 630 x 800 mm or

800 x 1260 mm
Feathering: possible
Other dimensions available on request.
Item number: Example: VSZ25M/08/022.5
VSZ25M/08 = Master number
xxx.x 022.5 = width 22.5 mm

 

 

Triflexil-M bonded particleboard (three-layer)

 

Material:

Pressboard / Polyester / Pressboard

Temp. Class:

B (130°C) according to IEC 60085

Features:

  • Triflexil® 2.5M; triple is a flexible multi-layer insulating material and temperature-resistant up to 130°C
  • The material properties and test methods are defined in IEC 60626
  • specialist combination consisting of: an inner layer of electrical insulation film made of polyester in accordance with DIN IEC 60674 and an outer layer each made of highly compressed roll pressboard
  • Type P6.1 according to IEC 60641-1
  • High dielectric strength is guaranteed by the use of an electrical insulation film made of polyester (F-PET)
  • Outer layers made of pressboard are highly absorbent for impregnating and trickling resins, resulting in excellent bonding of all winding components

 

Dimensions:

Master number IEC 60626-2 / standard climate 23/50
Nominal thickness Thickness tolerance Film thickness Mass per unit area Min. tensile strength unfolded Min. elongation unfolded Min. electrical breakdown voltage unfolded
lengthwise transverse lengthwise transverse
Slide PET 23 μm [mm] [%] [μm] [g/m2] [N/mm2] [%] [kV]
VSD25M/07 * 0,07 ± 15 23 94 85 60 3 18 7
VSD25M/10 * 0,10 ± 15 23 130 85 60 3 10 7
VSD25M/30 * 0,30 ± 15 23 395 90 60 5 10 7
PET36 film μm
VSD40M/15 * 0,15 ± 15 36 190 120 80 5 10 10
VSD40M/20 * 0,20 ± 15 36 240 120 70 5 10 10
VSD40M/25 * 0,25 ± 10 36 320 100 60 5 10 10
VSD40M/30 * 0,30 ± 10 36 380 100 70 5 10 10
VSD40M/35 * 0,35 ± 10 36 435 100 70 5 10 10
VSD40M/45 * 0,45 ± 10 36 560 105 65 5 10 10
VSD40M/50 * 0,50 ± 10 36 630 100 65 5 10 10
Slide 50 μm
VSD50M/15 * 0,15 ± 15 50 190 110 80 3 10 10
VSD50M/20 * 0,20 ± 15 50 230 110 70 3 10 10
Slide 75 μm
VSD75M/15 * 0,15 ± 15 75 200 110 80 5 10 13
VSD75M/20 * 0,20 ± 15 75 247 110 80 5 10 14
VSD75M/25 * 0,25 ± 15 75 280 110 80 5 10 16
VSD75M/30 * 0,30 ± 15 75 399 110 75 5 10 17

 

* not a stock item This information only provides general guidelines for the use of our Products

 

Delivery formats: Rolls: max. 1340 mm untrimmed, max. 1310 mm trimmed
Ribbons: from 4 mm width
Formats: 630 x 800 mm or

800 x 1260 mm
Feathering: possible
Other dimensions available on request.
Item number: Example: VSD25M/07/022.5
VSD25M/07 = Master number
xxx.x 022.5 = width 22.5 mm

 

 

Triflexil-M/VL (polyester fleece/polyester film/polyester fleece)

 

Material:

Polyester fleece / polyester film / polyester fleece

Temp. Class:

B/F (130 °C) according to IEC 60085

Features:

  • Triflexil® M/VL is a flexible multi-layer insulating material and is temperature-resistant up to 130°C
  • The material properties and test methods are defined in IEC 60626
  • Triple combination consisting of one layer of polyester film and one layer of polyester fleece High dielectric strength is guaranteed by the use of an electrical insulation film made of polyester (F-PET), DuPont Mylar A®
  • The outer layers of polyester nonwoven fabric are very absorbent for impregnating and trickling resins, resulting in excellent bonding of all winding components
  • Triflexil® M/VL can be easily punched, cut, formed and coated Smooth surface, thus good machine processability

 

Color:

white

 

Dimensions:

Master number IEC 60626-2 / standard climate 23/50
Nominal thickness Thickness tolerance Film thickness Surface mass Min. tensile strength unfolded Min. elongation unfolded Min. electrical breakdown voltage unfolded
lengthwise transverse lengthwise transverse
[mm] [%] [µm] [g/m2] [N/mm2] [%] [kV]
NIMVL12 * 0,12 ± 15 23 115 85 60 25 50 5
NIMVL15 * 0,15 ± 15 50 143 80 60 30 70 7
NIMVL18 * 0,18 ± 15 75 190 80 80 30 70 8
NIMVL20 * 0,20 ± 15 100 220 90 90 25 75 11
NIMVL23 * 0,23 ± 15 125 260 90 90 25 75 14
NIMVL30 * 0,30 ± 15 190 350 100 90 25 75 19
NIMVL35 * 0,35 ± 10 250 425 100 90 30 80 24
NIMVL45 * 0,45 ± 10 350 555 110 120 120 120 26

 

* not a stock item This information only provides general guidelines for the use of these Products.

 

Delivery formats: Rolls: max. 2000 mm untrimmed
Ribbons: from 4 mm width
Formats: 615 x 800 mm or

800 x 1230 mm
Other dimensions available on request.
Item number: Example: NIMVL23/022.5
NIMVL23 = master number
xxx.x 022.5 = width 22.5 mm

 

 

Triflexil-M/VL-UE, coated (polyester fleece/polyester film/polyester fleece)

 

Material:

Polyester fleece coated / polyester film / polyester fleece coated

Temp. Class:

  • F (155°C) according to IEC 60085
  • Triflexil® M/VL-UE is a flexible multi-layer insulating material and temperature-resistant up to 155°C

Features:

  • Insulation material class F (155°C) The material properties and test methods are specified in IEC 60626 Triple combination consisting of one layer of polyester film and one layer of polyester fleece coated with a temperature-resistant lacquer
  • High dielectric strength is guaranteed by the use of an electrical insulation film made of polyester (F-PET), DuPont Mylar A®
  • The mechanical strength is achieved by using nonwoven mats made of polyester fibers (P-PET) as outer layers.
  • Triflexil® M/VL-UE can be easily punched, cut, formed and coated Smooth surface due to resin coating, thus good machine processability

 

Dimensions:

Master number according to IEC 60626-2 / standard climate 23/50
Nominal thickness Thickness tolerance Film thickness Mass per unit area Min. tensile strength unfolded Min. elongation unfolded Min. dielectric strength unfolded
lengthwise transverse lengthwise transverse
[mm] [%] [µm] [g/m2] [N/mm2] [%] [kV]
NIMVLUE14 * 0,14 ± 15 23 125 50 25 20 50 5
NIMVLUE16 * 0,16 ± 15 50 160 75 60 20 55 7
NIMVLUE19 * 0,19 ± 15 75 200 80 60 20 60 8
NIMVLUE21 * 0,21 ± 15 100 230 80 60 20 60 11
NIMVLUE23 * 0,23 ± 15 125 270 90 75 20 60 14
NIMVLUE31 * 0,31 ± 15 190 355 100 85 20 60 19
NIMVLUE36 * 0,36 ± 10 250 440 100 100 20 65 24
NIMVLUE41 * 0,41 ± 10 200 505 100 100 20 60 27
NIMVLUE46 * 0,46 ± 10 350 565 100 100 30 80 30

 

* No stock item This information only provides general guidelines for the use of our Products.

 

Delivery formats: Rolls: max. 2000 mm untrimmed
Ribbons: from 4 mm width
Other dimensions available on request.
Item number: Example: NIMVLUE16/022.5
NIVIMVLUE16/ = master number
xxx.x 022.5 = width 22.5 mm

 

 

Triflexil-NMN/50 µm (Nomex®/Mylar®/Nomex®)

 

Temp. Class:

F (155°C) / H (180 °C)

Features:

  • Triflexil® NMN/50 is a flexible multi-layer insulating material and is temperature-resistant up to 155°C (insulating material class F), and can also be used up to 180°C (insulating material class H) when suitable impregnating resin systems are used.
  • The material properties and test methods are defined in the IEC 60626 standard
  • 3-fold combination consisting of one layer of polyester film according to IEC 60674 and one layer each of aramid paper (Nomex®)
  • High dielectric strength is guaranteed by the use of an electrical insulation film made of polyester (F-PET), DuPont Mylar AA

Color:

cream, with yellow identification stripe

 

Dimensions:

Master number according to IEC 60626-2 / standard climate 23/50
Nominal thickness Thickness tolerance Film thickness Nomex® paper thickness Grammage Min. tensile strength unfolded Min. elongation unfolded Min. dielectric strength unfolded
lengthwise transverse lengthwise transverse
[mm] [%] [µm] µm] [µm] [g/m2] [%] [%] [kV]
NINMN50/13 * 0,13 ± 15 23 50 135 90 60 15 20 8
NINMN50/16 * 0,16 ± 15 50 50 170 95 80 20 30 10
NINMN50/21 ♦ 0,21 ± 15 100 50 240 100 100 25 40 14
NINMN50/24 * 0,24 ± 15 125 50 275 100 100 25 40 15
NINMN50/30 ♦ 0,30 ± 15 190 50 365 100 100 25 40 20
NINMN50/36 ♦ 0,36 ± 10 250 50 450 100 100 25 35 26
NINMN50/41 * 0,41 ± 10 300 50 520 100 100 25 35 27
NINMN50/46 * 0,46 ± 10 350 50 590 100 100 25 35 28

 

♦ in wide rolls of 880 mm from stock * not a stock item, this information only provides General Information for the application of these Products.

 

Delivery formats: Rolls: max. 1830 mm untrimmed
Ribbons: from 4 mm width
Formats: 600 x 800 mm or

900 x 1000 mm
Other dimensions available on request.
Item number: Example: NINMN50/24/022.5
NINMN50/24 = master number
xxx.x 022.5 = width 22.5 mm

 

 

Triflexil-NMN/80 µm (Nomex®/Mylar®/Nomex®)

 

Material:

Triflexil NMN (Nomex® 80 µm / Mylar® / Nomex® 80 µm)

Temp. Class:

F (155°C) / H (180 °C)

Features:

  • Triflexil® NMN/80 is a flexible multilayer insulating material and is temperature-resistant up to 155°C (insulating material class F), and can also be used up to 180°C (insulating material class H) if suitable impregnating resin systems are used.
    The material properties and test methods are specified in IEC 60626
  • 3-fold combination consisting of one layer of polyester film according to IEC 60674 and one layer each of aramid paper (DuPont Nomex®)

Color:

cream, with green identification stripe

 

Dimensions:

Master number according to IEC 60626-2 / standard climate 23/50
Nominal thickness Thickness tolerance Film thickness Mass per unit area Tensile strength unfolded Elongation unfolded Min. dielectric breakdown voltage unfolded
lengthwise transverse lengthwise transverse
[mm] [%] [µm] [g/m2] [N/mm2] [%] [kV]
NINMN80/22 ♦ 0,22 ± 15 50 220 90 80 10 20 10
NINMN80/25 * 0,25 ± 15 75 255 90 80 20 25 16
NINMN80/30 ♦ 0,30 ± 15 125 325 90 80 20 25 26
NINMN80/36 * 0,36 ± 15 190 420 100 95 20 25 23
NINMN80/42 * 0,42 ± 10 250 500 100 95 20 25 26
NINMN80/48 * 0,48 ± 10 300 570 100 95 20 25 28

 

♦ in wide rolls of 880 mm from stock * not a stock item This information only provides General Information for the application of these Products.

 

Delivery formats: Rolls: max. 1830 mm untrimmed
Ribbons: from 4 mm width
Formats: 600 x 900 mm or

900 x 1200 mm
Other dimensions available on request.
Item number: Example: NINMN80/36/022.5
NINMN80/36 = master number
xxx.x 022.5 = width 22.5 mm

 

 

Triflexil-NMN411 phase insulation (Nomex®411/polyester film/Nomex®411)

 

Material:

Nomex®411 / Polyester film / Nomex®411

Temp. Class:

F (155°C) / H 180 ° C)

Features:

  • PUCARO Triflexil® NMN/411 is a flexible multi-layer insulating material and is temperature-resistant up to 155°C (insulating material class F), and can also be used up to 180°C (insulating material class H) when suitable impregnating resin systems are used.
  • The material properties and test methods are defined in the IEC 60626 standard
  • Triple combination consisting of one layer of polyester film in accordance with IEC 60674 and one layer each of uncalendered aramid paper (Nomex®411)
  • High dielectric strength is guaranteed by the use of an electrical insulation film made of polyester (F-PET), DuPont Mylar A®
  • Smooth surface, abrasion-resistant, therefore good machinability
  • Triflexil® NMN/411 can be easily punched, cut, formed and coated
  • Good absorption of impregnating and trickling resins due to the non-calendered surface
  • The outer layers of Nomex® 411 give the insulation great suppleness and excellent absorbency. It is therefore ideal for use as wrapping head and phase insulation

Color:

white

 

Dimensions:

Master number according to IEC 60626-2 / standard climate 23/50
Nominal thickness Thickness tolerance Film thickness Mass per unit area Min. tensile strength unfolded Min. elongation unfolded Min. electrical breakdown voltage
lengthwise transverse lengthwise transverse
[mm] [%] [µm] [g/m2] [N/mm2] [%] [kV]
NINMN411/25 * 0,25 ± 20 23 135 20 20 5 15 5
NINMN411/26 * 0,26 ± 20 36 155 30 25 5 20 7
NINMN411/27 ♦ 0,27 ± 20 50 170 35 30 5 25 9
NINMN411/30 * 0,30 ± 20 75 205 35 35 5 30 11
NINMN411/33 * 0,33 ± 20 100 240 45 45 7 40 14
NINMN411/35 * 0,35 ± 20 125 280 45 50 7 50 17

 

♦ in wide rolls from 900 – 930 mm from stock * not a stock item This information only provides General Information for the application of our Products.

 

Delivery formats: Rolls: max. 950 mm trimmed
Ribbons: from 4 mm width
Formats: 600 x 900 mm or

900 x 1200 mm
Other dimensions available on request.
Item number: Example: NINMN411/30/022.5
NINMN411/30 = master number
xxx.x 022.5 = width 22.5 mm

 

 

Triflexil-NKN (Nomex®/Kapton®/Nomex®)

 

Material:
Nomex® / Kapton® / Nomex®

 

Temp. Class:

H (180 °C) / C (200 °C)

Features:

  • Triflexil® NKN is a flexible multilayer insulating material and is temperature-resistant up to 180°C (insulating material class H), and can also be used up to 200°C (insulating material class C) if suitable impregnating resin systems are used.
    The material properties and test methods are specified in IEC 60626
  • 3-fold combination consisting of one layer of Kapton® polyimide film according to IEC 60819 and one layer each of aramid paper (Nomex®)
  • Smooth surface, abrasion-resistant, therefore good machinability
  • Triflexil NKN can be easily punched, cut, formed and coated
  • Low moisture absorption, good thermal and chemical resistance
  • To increase the temperature resistance, a polyimide film (Kapton®) is used as the inner layer instead of a polyester film.

Color:

brownish

 

Dimensions:

Master number according to IEC 60626-2 / standard climate 23/50
Nominal thickness Thickness tolerance Film thickness Nomex® thickness Surface mass Min. tensile strength unfolded Min. elongation unfolded Min. dielectric breakdown voltage unfolded
lengthwise transverse lengthwise transverse
[mm] [%] [μm] [μm] [g/m2] [N/mm2] [%] [kV]
Film PET 25 μm
NINKN14 * 0,14 ± 15 25 50 140 110 55 15 15 8
NINKN20 ♦ 0,20 ± 15 25 80 190 95 55 15 15 8
NINKN25 * 0,25 ± 15 25 80 235 95 55 15 15 9
NINKN30 * 0,30 ± 15 25 130 290 100 60 15 15 10
NINKN40 * 0,40 ± 15 25 180 410 100 70 15 15 11
NINKN55 * 0,55 ± 15 25 250 540 100 70 15 15 12
Film PET 50 μm
NINKN50/17 * 0,17 ± 15 50 50 170 100 50 20 20 9
NINKN50/22 * 0,22 ± 15 50 80 210 100 80 20 20 9

 

♦ in wide rolls of 880 mm from stock * not a stock item This information only provides General Information for the application of our Products.

 

Delivery formats: Rolls: max. 965 mm untrimmed
Ribbons: from 4 mm width
Formats: 600 x 900 mm or

900 x 1000 mm
Other dimensions available on request.
Item number: Example: NINKN25/20/022.5
NINKN25/20 = master number
xxx.x = 022.5 Width 22.5 mm

We also supply stocked Nomex/Kapton/Nomex by the square meter!

 

 

Triflexil-NKN411 phase insulation (Nomex®411/Kapton®/Nomex®411)

 

Material:

Nomex®411 / Kapton® / Nomex®411

Temp. Class:

C (200°C) according to IEC 60085

 

  • Triflexil 2,5/NKN/411 is a flexible multilayer insulating material and temperature resistant up to 200°C
  • The test procedures are defined in IEC 60626
  • Insulating material for electrical engineering consisting of: an inner layer of Kapton® polyimide film and outer layers of Nomex® 411 uncalendered aramid paper
  • Good absorption of impregnating resins thanks to the non-calendered Nomex 411 outer layers
  • Good moldability
  • It is therefore ideal as winding head and phase insulation

Color:

brownish

 

Dimensions:

Master number according to IEC 60626-2 / standard climate 23/50
Nominal thickness Thickness tolerance Film thickness Surface mass Min. tensile strength unfolded Min. elongation unfolded Min. electrical breakdown voltage unfolded
transverse lengthwise longitudinal transverse
[mm] [%] [μm] [g/m2] [N/mm2] [%] [kV]
NINKN411/27 * 0,27 15 25 145 20 20 7 10 7

* no stock item

This information only provides general guidelines for the use of our Products.

 

Delivery formats: Rolls: max. 965 mm untrimmed
Ribbons: from 4 mm width
Formats: 630 x 800 mm or

800 x 1260 mm
Other dimensions available on request.
Item number: Example: NINKN411/27/022.5
NINKN411/27 = master number
xxx.x = 022.5 Width 22.5 mm

 

Related products