Properties:
Sealing mastic 7510 is a solvent-free, permanently elastic, light gray mastic. Its shape, plastic properties and therefore its effectiveness remain unchanged over a temperature range of – 40 °C to + 50 °C. Even on vertical surfaces, it does not tend to flow, even after 12 hours at 180 °C, so that it is suitable for short-term sealing purposes up to this temperature range. Sealant 7510 contains no corrosive or corrosive substances, is self-adhesive and adheres to all clean, dry materials. It is non-flammable, contains no toxic substances, is physiologically harmless and can be shaped by hand.
Application:
The required amount of sealing mastic 7510 is pre-formed by hand and pressed onto the sealing surface or into the joint to be sealed. It is advisable to moisten the filler with water to improve its gliding properties. Due to its self-adhesive effect and its particularly good adhesive properties, 7510 sealing putty provides a very good seal on almost all materials, even at low contact pressure. A prerequisite for good adhesion is an oil and grease-free substrate. This is particularly important for molds that are treated with silicone release agents.
Sales unit
| Item number | Bucket [kg] |
| DK7510/16000 | 16 |
Note
Data sheets are available on request or can be downloaded by clicking on the master number. The technical information is given to the best of our knowledge. They do not release the user from the obligation to check the suitability of the Products by carrying out his own tests.
