C06 |
C06HT |
S06 |
S06HT |
B06 |
F06 |
 |
 |
 |
 |
 |
 |
| Switching type: | Normally closed contact | Normally closed contact | Normally closed contact | Normally closed contact | ||
| automatically resetting | ||||||
| C06 | C06HT | S06 | S06HT | B06 | F06 | |
| insulated: Insulation cap/housing | no | Yes | Yes | yes | ||
| Temperature | ||||||
| Nominal switching temperature (NST) [°C] in 5 K steps |
70 – 200 | 205- 250 | 70 – 200 | 50 -250 | 70 – 200 | |
| Tolerance range -Standard Tol [ [K] | ± 5 | |||||
| Reverse Switch Temperature (RST below NST) UL [K] Reverse Switch Temperature (RST below NST) VDE [ °C] |
-35 ± 15 ≥ 35 |
|||||
| Tension | ||||||
| max. Operating voltage range AC to … [VAC] | 500 V AC / 28 V DC | |||||
| Rated voltage AC [VAC] | 250 (VDE), 277 (UL) | |||||
| Current/switching cycles | ||||||
| Rated current AC – cos φ = 1.0 [A] / [n] | 10,0 / 10’000 | |||||
| Rated current AC – cos φ = 0.6 [A] / [n] | 6,3 / 10’000 | |||||
| Max. Switching current AC – cos φ = 1.0 [A] / [n] | 25,0 / 2’000 | |||||
| Rated voltage DC [V] | 24 V | |||||
| Max. Switching current DC [A] / [n] | 40,0 / 10’000 | |||||
| Additional specifications | ||||||
| High-voltage strength [kV] | — | 2 | ||||
| Total bounce time [ms] | < 1 | |||||
| Contact resistance (according to MIL-STD R5757) [mΩ] | ≤ 50 | |||||
| Vibration resistance 10 … 60 Hz [m/s2] | 100 | |||||
| Compressive strength of the switch housing [N] | 600 | |||||
| Suitable for installation in protection class | I | I + II | ||||
| Impregnation resistance | suitable | |||||
| Available Licenses and Approvals | ||||||
| please specify | IEC, ENEC, VDE, UL, CSA, CQC | |||||
| Dimensions (standard) | ||||||
| C06 | C06HT | S06 | S06HT | B06 | F06 | |
| Diameter or Ø d or l x b [mm] / dimension | 9,0 | 9,4 | 9,4 | 10,0 | ||
| Overall height h [mm] | from 6.3 | from 7.1 | from 6.7 | from 7.5 | from 6.7 | from 5.0 |
| Length of insulation cap l [mm] | — | 16,0 | — | — | ||
| Standard stranded wire connection: | 0.75 mm2/AWG18 | |||||
| C06 / C06HT | S06 / S06HT | B06 | F06 |
 |
 |
 |
 |
Note
The data and information provided are based on tests and test series. They are intended as a guide, which is why there may be deviations for individual applications and uses. The suitability in a specific application must be checked by the user in each individual case.
