Switching type:			Opener CR6 self-holding	Opener SR6 self-holding
isolated:			no	yes
Temperature
Nominal switching temperature (NST), in 5 K steps		[°C]	60 – 180
Tolerance range ≤ 140 °C		Tol [ [K]	± 5
Tolerance range ≥140 °C		Tol [ [K]	± 10
Switch-back temperature (RST below NST)	UL	[ [K]	≥ 35
(defined RST on customer request)	VDE	[ °C]	≥ 35
Tension
Operating voltage range up to …			250 V
Rated voltage AC		[VAC]	120/230 (VDE), 250 (UL)
Current/switching cycles
Rated current – cos j = 1.0		[A] / [n]	10,0 / 1‘000
Rated current – cos j = 0.6		[A] / [n]	6,3 / 1‘000
max. Switching current cos j = 1.0		[A] / [n]	25,0 / 1‘000
Other data
High-voltage resistance		[kV]	—	2
Total bounce time		[ms]	< 1
Contact resistance (according to MIL-STD R5757)		[mΩ]	£ 50
Vibration resistance 10 … 60 Hz		[m/s²]	100
Pressure resistance of the switch housing		[N]	600
Available licences
please specify			IEC, ENEC, VDE, UL, CSA, CQC
Dimensions (standard)

Diameter		Ø d [mm]	9,0	9,4
Overall height		h [mm]	from 6.3	from 6,7
Length of the insulation cap		l [mm]	—	17,0
Standard connection		Stranded wire:	0,75 mm2/AWG 18
Functional diagram
The ceramic resistor connected in parallel to the switch heats up after the contact opens, which keeps the contact in the open state.

Temperature limiter type CR6 / SR6

Pages