Balancing Compound for polyglass bandages

Balancing Compound for polyglass bandages

€0,00

This Balancing Compound, consisting of two components, was specially developed for POLYGLAS hinges.

Mixing ratio:

100 parts by weight A (blue) 86 parts by weight B (yellow) Tolerance ± 2%

Curing:

at 23-25°C 3-4 hours at 150°C approx. 30 minutes

Pot life of the mixture:

approx. 1 ½ hours at 20°C

Temp. Class:

H (180°C)

Presentation:

1 kg cans

Item no. AKA/1

Component A (blue)

Item no. AKB/1

Component B (yellow)

Presentation:

5 kg cans

Item no. AKA/5

Component A (blue)

Item no. AKB/5

Component B (yellow)

Art.-Nr.

Processing

The blue and yellow components are mixed in a ratio of 100 : 86 until a continuous green coloration occurs. It is recommended to press the balancing putty under the drum into the winding head. If this is not possible, it can be applied to the POLYLGAS bandage. This requires spot heating of the POLYGLAS drum using an adjustable hot air device. The heating leads to a firm bond between the POLYGLAS tape and the balancing putty. Due to the relatively long processing time of the putty, mixing during the balancing process is not necessary. The pot life can be extended by cooling (e.g. in a refrigerator). This information is only a general guideline for application and does not exempt you from carrying out your own tests!

Related products