| Switching type: | Normally open contact P08 resetting | Normally open contact H08 resetting | Normally open contact V08 resetting |
| isolated: | yes | yes | yes |
| Temperature | |||
| Nominal switching temperature (NST), [°C] in 5 K steps |
70 – 200 | 70 – 150 | |
| Tolerance range -Standard- Tol [K] | ± 5 | ||
| Switch-back temperature (RST below NST) UL [K] VDE [°C] |
-35 ± 15
≥ 35 |
||
| Tension | |||
| max. Operating voltage range AC to … [VAC] | 500 V | ||
| Rated voltage AC [VAC] | 250 (VDE), 277 (UL) | ||
| Current/switching cycles | |||
| Rated current AC – cos j = 1.0 [A] / [n] | 10,0 / 10‘000 | ||
| Rated current AC – cos j = 0.6 [A] / [n] | 6,3 / 10‘000 | ||
| Other data | |||
| High-voltage resistance [kV] | 2 | 3,75 | |
| Total bounce time [ms] | < 1 | ||
| Contact resistance (according to MIL-STD R5757) [mΩ] | £ 50 | ||
| Vibration resistance 10 … 60 Hz [m/s2] | 100 | ||
| Compressive strength of the switch housing [N] | 600 | ||
| Suitable for installation in protection class | I + II | I + II | II |
| Impregnation resistance | suitable | ||
| Available licences | |||
| please specify | IEC, ENEC, VDE (appr. <150°C), CQC | ||
| Dimensions (standard) | |||
| Diameter or dimension Ø d or l x b[mm] | 17 x 11,0 | 17,0 x 11,0 | 26,0 x 13,5 |
| Overall height h [mm] | from 6,0 | from 7,5 | from 10 |
| Length of insulation cap l [mm] | — | — | — |
| Max. Torque [SW/Nm] | — | 3,0 | 2,5 |
| Standard stranded wire connection: | — | 0,75 mm2/AWG18 | 0,50 mm2/AWG 20 |
Temperature limiter type P08 / H08 / V08
C08, S08 and L08 are switches with surface-mounted enclosures, fully insulated, automatically resetting with Expoxy
P08 is equipped with connection pins, S08 and L08 are equipped with connection cables.
