P08 |
H08 |
V08 |
 |
 |
 |
| Switching type | Normally open contact P08 resetting | Normally open contact H08 resetting | Normally open contact V08 resetting |
| isolated: | yes | Yes | yes |
| Temperature | |||
| Nominal switching temperature (NST), [°C] in 5 K steps |
70 – 200 | 70 – 150 | |
| Tolerance range -Standard Tol [K] | ± 5 | ||
| Reverse Switch Temperature (RST below NST) UL [K] Reverse Switch Temperature (RST below NST) VDE [°C] |
-35 ± 15 ≥ 35 |
||
| Tension | |||
| max. Operating voltage range AC to [VAC] | 500 V | ||
| Rated voltage AC [VAC] | 250 (VDE), 277 (UL) | ||
| Current/switching cycles | |||
| Rated current AC – cos φ = 1.0 [A] / [n] | 10,0 / 10’000 | ||
| Rated current AC – cos φ = 0.6 [A] / [n] | 6,3 / 10’000 | ||
| Additional specifications | |||
| High-voltage strength [kV] | 2 | 3,75 | |
| Total bounce time ms] | < 1 | ||
| Contact resistance (according to MIL-STD R5757) [mΩ] | < 50 | ||
| Vibration resistance 10 … 60 Hz [m/s2] | 100 | ||
| Compressive strength of the switch housing [N] | 600 | ||
| Suitable for installation in protection class | I + II | I + II | II + II |
| Impregnation resistance | suitable | ||
| Available Licenses and Approvals | |||
| Please specify | IEC, ENEC, VDE (appr. <150°C), CQC | ||
| Dimensions (standard) | |||
| Diameter or dimension Ø d or l x b [mm] | 17 x 11,0 | 17,0 x 11,0 | 26,0 x 13,5 |
| Overall height h [mm] | from 6.0 | from 7.5 | from 10 |
| Length of insulation cap l [mm] | — | — | — |
| Max. Torque [SW/Nm] | — | 3,0 | 2,5 |
| Standard stranded wire connection: | — | 0.75 mm2/AWG18 | 0.50 mm2/AWG 20 |
| P08 | H08 | V08 |
 |
 |
 |
Note
The data and information provided are based on tests and test series. They are intended as a guide, which is why there may be deviations for individual applications and uses. The suitability in a specific application must be checked by the user in each individual case.
We will be pleased to advise you.
